Electrical Connection:
Fitting a plug
The mains lead of this appliance will already be fitted with a BS1363 13A plug. If the fuse
has to be replaced, use a 13 amp fuse complying with BS 1362.
If the plug is not suitable for your socket then the plug must be cut off and disposed of safely.
An appropriate plug should be fitted as follows:
IMPORTANT:
The wires in the mains lead are coloured in accordance with the following
code:
Green and Yellow - Earth
Blue - Neutral
Brown - Live
The wire which is coloured green and yellow must be connected to the terminal in the plug
which is marked with the letter E or the earth symbol or coloured green or green and yellow.
The wire which is coloured blue must be connected to the terminal which is marked with the
letter N or coloured black or blue.
The wire which is coloured brown must be connected to the terminal which is marked with
the letter L or coloured red or brown.
Make sure that the connections are tight and that there are no loose strands of wire and no
insulation trapped under the terminals. Tighten the clamp in the plug making sure that it grips
the outer covering of the cord. If fitting a BS 1363 13A fused plug then fit a 13A fuse. Tighten
the plug cover securely. If you are in any doubt, consult a qualified electrician.
IMPORTANT:
if the supply cord is damaged, it must be replaced by the manufacturer,
service agent or similar qualified person in order to avoid a hazard. The supply cord may
become warm when the appliance is in use.
WARNING - THIS APPLIANCE MUST BE EARTHED
Electrical connection: 230V ~50Hz, 13.5A, 3100W
Summary of Contents for CTIN01
Page 7: ......
