background image

INTRODUCTION

.

To ensure you obtain full benefits from your new induction hob:

•  Please read this instruction booklet carefully, and follow all instructions. 

• 

If you are unsure of any aspect of the installation, use or performance of your 

appliance, please contact the after sales number shown on the back page

.

SPECIFICATIONS

Model

CTIN01

SKU Number

444440541

Dimensions

Height

275mm

Width

320mm

Depth

600mm

Weight

12kg

Front cooking zone

level 1 to 8 = 500 to 1300W, 60 to 240°C

Rear cooking zone

level 1 to 8 = 500 to 1800W, 60 to 240°C

Voltage

230V ~50Hz

Power rating

3100W

INSTALLATION

Installation Requirements

I

t is essential that this appliance is installed correctly. Installation should comply with all 

local electrical, and health and safety requirements.

Before Connection to Power Supply:

Remove all packaging.

Check the hob for damage. Report any damage immediately to the carrier or supplier.

Remove any protective plastic coating from the outer panels.

Check the available power supply corresponds to that shown on the hob rating label.

Location:

This induction hob is for indoor use only.

Do not install the hob in a cabinet, it is for counter top use only.

The appliance is only to be installed in locations where its use and maintenance is 

restricted to trained personnel.

The mains lead should reach from the mains socket without straining the connections.

Do not let the mains lead hang over the edge of the table or counter, and keep it away 

from any hot surfaces.

Do not let the mains lead run across an open space

Do not place the appliance where the mains lead could fall into a sink.

Do not place the appliance near a hot gas or electric burner

.

Ensure the appliance is installed on a level, firm surface that is capable of supporting the 

weight of the appliance.

Do not place the appliance near objects wich are affected by magnetic fields, such as 

radios, televisions or recording devices.

Important:

DO NOT OBSTRUCT VENTILATION AROUND THE FRONT AND SIDES OF THE 

APPLIANCE.

Summary of Contents for CTIN01









Reviews: