4. Set bake timer to desired time
To set timer, turn knob clockwise to the required time. At any stage, the time can
be adjusted in either direction. For settings less than 10 minutes, first set to a
greater setting then turn down to the required time.
Note:
This 60 minute timer is completely independent of the oven control.
5. Time up
When the timer reaches 0 minutes, the buzzer sounds and the BAKE TIME
indicator illuminates. To cancel the buzzer and indicator, turn the timer fully anti
clockwise to the off position.
6. Unload oven
Open the door and unload the oven.
Grilling / Broiling:
1. Turn power on
The power switch illuminates when it is pressed and latched in the on
position.
2. Set thermostat fully clockwise to the GRILL position
The GRILL indicator will illuminate to show the GRILL function has been set, the
OVEN TEMPERATURE indicator will also illuminate whenever the element is on.
Only the top element is heated.
Note:
It is recommended that the GRILL function is only used with the oven door open, as
the oven fan is then automatically off. However if the GRILL function is used with the
door closed, the element will cycle when the oven temperature reaches 300°C to
prevent damage to the oven.
3. Load oven
Place an oven shelf towards the top of the oven. When the element has reached
bright red (approximately 5 minutes) position the dish under the element. It is
recommended the door is not closed.
Summary of Contents for CTCO01
Page 10: ...WIRING SCHEMATIC...
