7.
If a flame is still not present then re-check from start.
If a flame is established but not maintained then follow this check list:
1. Check thermocouple sensor is secured correctly and that burner ports are clean.
2.
Check that thermocouple is not damaged and is securely fixed to FFD section of gas
control.
3.
Check FFD is energising and maintaining flame.
4.
If after carrying out the above, the burner is still not maintaining the flame then check
magnet unit within control.
SECTION 4 - SPARES
When ordering spare parts, always quote the appliance type and serial number.
This information will be found on the data badge attached on the rear of the product.