Page 17
SERVICE TOOLS (cont.)
TROUBLESHOOTING (cont.)
tion of the individual switches on the front panel.
The following switches can be individually tested:
SINGLE Brewers:
Full Batch
Half Batch
Power
Brew Switch
Left Hidden
DONE
(-)
(+)
DUAL Brewers:
<- <- Full Batch
Full Batch -> ->
<- <- Half Batch
Half Batch -> ->
<- <- Power
Power -> ->
<- <- Brew Switch
Brew Switch -> ->
Left Hidden
DONE
(-) (+)
1. Place brew funnel(s) into rails on the brewer (both
sides on DUAL brewers).
2. Place server(s) beneath the brew funnel(s).
3. Press and hold the upper right hidden switch until
display reads
SET LANGUAGE.
Release the switch.
Continue to press and release switch until
SERVICE
TOOLS
appears.
4. Press and release
YES.
The display should read
TEST OUTPUTS?.
Press and release
NO
to advance
to
TEST SWITCHES
.
5. Pressing
NO
in this screen will advance to the
next function. Press
YES
in the
TEST SWITCHES
screen to test the switches. The display will read
NOTHING PRESSED
.
6. From this screen, press any of the switches on the
front of the brewer except the upper right hidden
switch. While the switch is pressed, the display
shows the name of that switch. If the name does
not appear, or if it remains after the switch has been
released, the switch is defective. Each switch can
be tested in this manner.
7. After all switches have been tested, press and re-
lease the right hidden switch (®). This will return
to
TEST SWITCHES?
. To exit programming, press
and release the ON/OFF switch (either on DUAL
brewers) located on the front switch panel. This
will exit
TEST SWITCHES
and return to the
MAIN
SCREEN.
NOTE:
If the operator wishes to test more than one
function in the
SERVICE TOOLS
section (outputs or
switches), it is not necessary to exit the program.
Use the flow chart for
SERVICE TOOLS
to navigate
to a particular function.
41747 112608
RELEASED FOR PRODUCTION
DIR Num: 41747.0000 12, December 2018
