5
5. Clean the Inlet Tube with the supplied brush
(PN 00674.0000) using the cleaning
product solution.
8
continued >
CLEANING
10. Transfer all the faucet parts to a three compartment sink
for cleaning. Fill the first sink with a soap solution using
a mild detergent, the second sink is used for clean rinse
(Hot Water), and the third is used for a sanitizer solution
(75° F warm water and approved sanitizer).
9. Turn the faucet wingnut in a counter-clockwise direction,
and remove the faucet from the dispenser. Unscrew the
faucet cap from the faucet body, then disassemble the
faucet parts.
8. Clean the sight gauge tube with the supplied foam brush
(PN 57892.0000). Do NOT use a nylon bristle brush.
Using any other brush to clean the tube VOIDS THE
FACTORY WARRANTY.
7. Remove sight gauge tube and bottom seal.
6. Press down on the sight gauge top to release the sight
gauge tube.
7
5
6
9
10
082321
Summary of Contents for Soft Heat Infusion Series
Page 8: ...8...
