Bunn My Cafe MCU, Owner'S Manual

Page: 10 / 48

1. Insert Water Drawer
into Drawer Guides.
Water Drawer must be
locked into place before
Coffee Maker will operate.
2. Open Spin Lid on top
of Coffee Maker.
3. Using your preferred
cup or measuring
device, fill Pour-In Bowl
with desired amount of
water (minimum 4 oz.,
maximum 14 oz.).
Note: the cup positioned
on Drip Tray and under
the Water Drawer must be
larger than the amount of
water you pour inside.
4. Close Spin Lid on top
of Coffee Maker and
position cup on Drip
Tray under Water
Drawer.
Note: be sure cup is heat
resistant.
5. Push Brew Button.
6. At end of brew cycle,
remove cup from
Drip Tray.
To remove the Water
Drawer, press down on
the button located on the
top of the Water Drawer
handle and pull Water
Drawer out along the
Drawer Guides.
DISPENSING HOT WATER
WITH WATER DRAWER
8
Hot Water
Soft Pods & Tea Bags
Ground Coffee
DRAWER FORMAT COMPATIBILITY
Each Drawer is designed to brew with specific coffee or tea formats. Do not insert any other
format or objects in the Drawer other than those listed here.
K-Cup
®
is a registered trademarks of Keurig, Incorporated.
BUNN is not affiliated with Keurig, Incorporated.
K-Cup
®
Packs
Cup Drawer
K-Cup ® Packs
K-Cup
®
Compatible Packs
Ground Coffee Drawer
Ground Coffee
Loose Tea
Pod Drawer
Soft Coffee Pods
Soft Tea Pods
Tea Bags
Water Drawer
Use to dispense hot water instantly to prepare a wide variety
of beverages, food and more.
Do not insert any coffee or tea format.