Bunn LCR-2 Installation And Operating Manual Download

Page: 14 / 36

PROGRAMMING THE DISPENSER

Remove the lower splash guard assembly to access the digital programming module with LCD display.

Press the Down Arrow key to inter the programming menu.

Use the Up and Down Arrow keys to scroll through the menu screens.

Select Exit to leave the programming function and return to normal operations.

NOTE 1: Flashing menu items indicate which selection is active.

NOTE 2: Values shown below are the factory default values for English units.

NOTE 3: Values in [X - X] are the Min. and Max. for that function.

TANK TEMP XXX

CABINET TEMP XX

L DISPENSE RATIO

(-) 35:1 (+)

SET LF TUBE SIZE

1/8 EXIT 3/16

R DISPENSE RATIO

(-) 35:1 (+)

SET RT TUBE SIZE

1/8 EXIT 3/16

FLAVOR GUARD ?

NO EXIT YES

MENU SCREEN

ACTION

DESCRIPTION

LF TASTE OK ?

NO EXIT YES

FIND LF TARGET

PULL DISPENSE

RT TASTE OK ?

NO EXIT YES

FIND RT TARGET

PULL DISPENSE

If NO - go to LF DISP VOLUME menu.

Use the Down Arrow Key

to enter Programming

Functions

Use the (+) or (-) buttons to

adjust the Mix Ratio

Select tube size.

Use the (+) or (-) buttons to

adjust the Mix Ratio

Select tube size.

Select (YES) to activate.

Select (NO) to deactivate.

Select (YES) or (NO)

Place a 16 Oz. (500 mL)

cup under the Left dispense

tip, then activate the Left

dispenser

Select (YES) or (NO)

Place a 16 Oz. (500 mL) cup

under the Right dispense

tip, then activate the Right

dispenser

Normal Display for LCR models.

Enter the desired Mix Ratio for the concentrate

used in the Left dispenser. [20:1 - 100:1]

Enter Pump Tube Size to be used in the Left

metering pump, (see Tube Selection Chart)

Enter the desired Mix Ratio for the concentrate

used in the Right dispenser. [20:1 - 100:1]

Enter Pump Tube Size to be used in the Right

metering pump, (see Tube Selection Chart)

Select Yes, if you are ready to calibrate the Flavor

Guard sensor. Select NO, if you do not wish to

use this feature, (see Flavor Guard)

Select YES, if you have dispensed several cups

and are satisfied with the Left dispenser flavor.

Select NO, if you have not run taste test.

Calibrates the Left FlavorGard™ sensor to the

current MixProfile. The dispenser will shut OFF

automatically when finished.

Select YES, if you have dispensed several cups

and are satisfied with the Right dispenser flavor.

Select NO, if you have not run taste test.

Calibrates the Right FlavorGard™ sensor to the

current MixProfile. The dispenser will shut OFF

automatically when finished.

36026 042104

Summary of Contents for LCR-2





































Search results

Summary of Contents for LCR-2

Reviews:

Related manuals for LCR-2

Brands by name

Popular brands

Bunn LCR-2, Installation And Operating Manual

Search results

Summary of Contents for LCR-2

Reviews:

Related manuals for LCR-2

Brands by name

Popular brands