background image

15

 

MENU SCREEN 

 ACTION 

   DESCRIPTION

BIB EMPTY -> 250

(-)     EXIT     (+)

WTR START DELAY

(-)  .15SEC  (+)

WTR STOP DELAY

(-)  .15SEC  (+)

TEST LED’S  ?

NO   EXIT   YES 

TEST SWITCHES  ?

UseSwitchToTest

ENTER ASSET #

(-)  000000  (+)

SERIAL #

LCR  0000000

VIEW FAULTS?

(-)     EXIT     (+)

LATEST FAULT

NO FAULTS

FACTORY DEFAULTS

NO         YES

Use the (+) or (-) buttons to 

adjust empty BIB threshold

Use the (+) or (-) buttons to 

adjust delay time

Use the (+) or (-) buttons to 

adjust delay time

Select (YES) or (NO)

NONE

Use the (+) or (-) buttons to 

adjust the ASSET NUMBER

NONE

Select (+) to view Fault 

Conditions

Use (+) or (-) to scroll through 

the Faults

Select (YES) or (NO)

Used to set the Conductance Threshold for the 

Empty BIB warning. Default is 250

Dispense Valve ON Delay. Eliminates weak mix 

at the beginning of a dispense.

Dispense Valve OFF Delay. Flushes the mix 

chamber at the end of a dispense.

LED diagnostics. Selecting YES will light all Front 

Door LED’s.

Switch Diagnostic: Activate switches separately to 

test. Display will indicate which Switch has been 

activated. NOTE: Door Interlock switch must be 

held closed.

Allows the user the option of entering an Asset 

Number. Default is 000000

Displays the manufacture’s Serial Number (should 

be identical to the Serial Number on the machine 

Data Plate)

This unit stores the last 3 Fault Conditions in 

memory for diagnostic purposes.

Displays up to 3 FAULT Conditions or NO FAULTS, 

if nothing has failed since the last “Reset Factory 

Defaults”.

CAUTION

: Selecting YES will RESET all 

Programming Functions to the Factory Default 

settings.

38059 073105

Summary of Contents for LCA-2 IC



























Reviews: