Bunn G9-2T DBC, Installation And Operating Manual

Page: 7 / 10

7
NUMBER NAME NUMBER NAME
1 Regular 15 Jamaica Blue Mtn
2 Decaf 16 Guatemalan
3 Colombian 17 Light Roast
4 Colombia Supremo 18 Dark Roast
5 Costa Rican 19 Espresso
6 Ethiopian 20 Amaretto
7 Kona 21 Hazelnut
8 Kenya AA 22 French Vanilla
9 Sumatran 23 Irish Creme
10 French Roast 24 Vanilla Nut
11 Italian Roast 25 Caramel
12 Mocha Java 26 Raspberry
13 House Blend 27 Almond
14 Breakfast Blend 28 Dark Mtn Roast
COFFEE CHART
NOTE: If a number is chosen from the chart below, and entered into the grinder, check to be sure the number
entered represents the name of the coffee on the chart.
1. Grind into the funnel then insert the funnel into the brewer funnel rails.
2. The display will read the coffee name that was ground into the funnel.
3. If this name is different from the name on the chart, the grinder’s memory needs to be reset.
Resetting the grinder memory (to match the chart below)
1. Unplug grinder from the outlet.
2. Press in and hold both the STOP and the GRIND buttons and plug cordset into the outlet. After a short pause,
the display will show a series of 3 dashes followed by a series of 9 dashes.
3. When the 9 dashes appear, release the STOP and GRIND buttons, then press and release the STOP button.
4. The display will count down then return to the normal operating mode. The grinder should now be set to
match the coffee names with the numbers on the chart below.
33736 030205
SELECTING COFFEE NAMES (Continued)