Bunn DUAL / GPR-DBC Installation & Operating Manual Download Page 3

Page 3

00656.0001

00986.0000

00658.0000

20201.5600

USER NOTICES

The notices on this brewer should be kept in good condition.  Replace unreadable or damaged labels.

37881.0000

03408.0004

03409.0004

Artwork for P/N:  39803.0000
Artwork Rev:  A
Drawn:  REF
Date:  02/26/07

MAIN ON/OFF

SWITCH

39803.0000

12364.0000

37614.1 031512

WARNING

• DO NOT OVERLOAD CIRCUIT.
• ALWAYS ELECTRICALLY GROUND
  THE CHASSIS.
• DO NOT DEFORM PLUG OR CORD.
• FOLLOW NATIONAL AND LOCAL
  ELECTRICAL CODES.
• KEEP COMBUSTIBLES AWAY.

FAILURE TO COMPLY RISKS EQUIPMENT

DAMAGE, FIRE OR SHOCK HAZARD.

READ THE ENTIRE

OPERATING MANUAL BEFORE

USING THIS PRODUCT

00986.0000F  10/07   ©1994  Bunn-O-Matic Corporation

As directed in the International Plumbing Code of the 

International  Code  Council  and  the  Food  Code 

Manual of the Food and Drug Administration (FDA), 

this  equipment  must  be  installed  with  adequate 

backflow  prevention  to  comply  with  federal,  state 

and  local  codes.  For  models  installed  outside  the 

U.S.A., you must comply with the applicable Plumb-

ing /Sanitation Code for your area.

00824.0002

Summary of Contents for DUAL / GPR-DBC









Reviews: