background image

Page 2

For technical questions, please call 1-888-866-5797.

Item 61565 

        

Specifications

Overall Dimensions

22.82"H x 14.17"W x 13"D

Inside Dimensions

18.25"H x 12.75"W x 11.25"D

Capacity

1.5 cubic foot 

Construction

9 ga. steel plate housing
6 ga. steel plate door frame
5 ga. steel door

Keypad Features

0 - 9, A & B key code set
Green LED code “OPEN”
Red LED code “Battery Change”
Yellow LED code “Change Accepted”

Emergency Keys

2 emergency override keys

Interior

Padded floor
Adjustable shelf

Placement,
Mounting

4 Removable wheels;
Can be wall mounted

Finish

Dark gray powder coat

Weight

76.5 lbs.

IMPORTANT SAFETY INFORMATION

Installation Precautions

1.  Verify that installation surface has no hidden 

utility lines before drilling or driving screws.

2.  Wear ANSI-approved safety 

goggles during installation.

3.  Mount securely before use.

4.  Install only according to these instructions.  

Improper installation can create hazards.

5.  Keep installation area clean and well lit.

6.  Keep bystanders out of the area during installation.

7.  Do not install when tired or when under the 

influence of alcohol, drugs or medication.

8.  At least two people are needed to move this product. 

9.  Place the Safe on correct surface.   

Only use this Safe on a stable, level, clean and dry 

surface that is capable of sustaining the load.

Use Precautions

1. 

Keep closed and locked whenever unattended.   

RISK OF CHILD ENTRAPMENT AND 

SUFFOCATION.   

Check inside before closing.   

Do not allow children to play with or near safe.  

Keep keys and codes away from children.

2.  Keep clear of door when closing.

3.  Position batteries in proper polarity and 

do not install batteries of different types, 

charge levels, or capacities together.

4.  Use as intended only.

5.  Inspect before every use; do not use 

if parts are loose or damaged.

6.  Maintain product labels and nameplates.  

These carry important safety information.  

If unreadable or missing, contact 

Harbor Freight Tools for a replacement.

7.  Do not store Keys inside of the Safe.  

Place the emergency keys in a location 

outside of the safe making sure they are 

in a secure location that you can find.

Summary of Contents for 61565









Reviews: