ne-cut-manual-e
Page 9 / 10
Cleaning and Maintenance
After use clean the machine from dust and chips by vacuuming especially the blades and behind the
blades. Do not use compressed air to clean the machine from FR4 dust because then the fibre glass
fibres are dispensed all over the room.
You can clean the hood with a smooth cloth and some non abrasive cleaner.
Clean and grease regularly all moveable parts, especially slides of the upper blade run and the rings
around the eccentric axis. Depending on the amount of cuts and the material to be cut, the blades need to
be exchanged or resharpened. We offer blades as spare part so you can keep a blade-set in reserve.
Disposal
The board cutter Ne-Cut is made from recyclable materials and is to be supplied at a later decomissioning
in a proper and environmentally friendly manner.
Spare part list
Bungard Elektronik GmbH & Co. KG, Rilkestraße 1, 51570 Windeck – Germany
Tel.: +49 2292 / 9 28 28-0, Fax: +49 2292 / 9 28 28-29
, E-mail: [email protected]
Name
630004
Exzenterwelle
630008
Sechskant mit Kugelkopf
630001
Satz Messer
630006
Bolzen mit Schlitz
630007
Scheibe
630005
630002
Haube
Artikelnr.
English
eccentric roller
Hexagon with Ball Head
set of blades
Bolts with slot
disc
Exzenterscheibe
eccentric disc
Hood
