background image

Manual-HotAir06-sdo-one-E

page 10 / 10

Guarantee

All machines are submitted before distribution to examination on function and continuous operation firm-

ness. On the machine we grant a work warranty of 12 months to our customers starting from purchase

date on accuracy in material and processing. We warrant at our choice by exchange of incorrect parts or

by repair of the machine in our house. Old parts change into our possession.

Disclaimer of Warranty

Bungard GmbH & Co. KG reserves the right to change or enhance its machines or machine specifications

according to its judgement, if necessary. Bungard cannot be held responsible to implement aforesaid

changes into machines sold already.
Bungard products and services are liable to the current prices and conditions, which are subject to 

change.
The instructions and definitions in this document are also subject to change and mark no assurance on 

the part of Bungard. 
This manual contains informations of the Bungard HotAir06 SDO ONE and is the translated English ver-

sion.
Please regard the “Sales terms and delivery conditions”. These are available after fulfilment of the con-

tract. We don't furnish a guarantee or warranty in cause of damages at material or hurts of people be-

cause of
Incorrect use of the machine
Wrong setup, installing and operating of the machine or incapable service
Use of the machine with defective safety equipment
Non-observance of the service manual in regard to transport, stocking, setup, installation and service of 

the machine
Unlicensed modifications at the machine
Incorrect or incomplete repairs
Destructive force effect at the machine in cause of foreign objects or external use of force
Use of non-original spare parts
normal wear parts.
We cannot accept subsequent claims from damage or destruction of work pieces worked on in the ma-

chine, because we have no knowledge or control over the operating conditions at your site. This is valid in

a general manner also for requirements from damage to articles, buildings and persons as well as the en-

vironment. 
We do not warrant that the function of the machine will meet the customer's requirements or that the oper-

ation of the machine will to this regard be error free.
In no event will we be liable to the customer for any incidental, consequential, or indirect damages of any

kind, including loss of profit and prosecution for environmental pollution, even if we could have been

aware of the possibility of such damages.
All  information   was   arranged   with   great   care.   We   reserve   ourselves   however   mistake   and   technical

changes without previous announcement.
Running the machine in corroding, humid, dusty, extremely hot or explosive atmosphere   happens at

the operator's own risk and responsibility.
We explicitly exclude any warranty for damages resulting from running the machine in in corroding, hu -

mid, dusty, extremely hot or explosive atmosphere.

Copyright

©  2019 Bungard Elektronik GmbH & Co. KG

Bungard Elektronik GmbH & Co. KG, Rilkestraße 1, 51570 Windeck – Germany

Tel.: +49 (0) 2292/9 28 28 - 0, Fax: +49 (0) 2292/9 28 28 - 29, E-mail: [email protected]

Summary of Contents for HOT AIR 06 SDO ONE











Reviews: