BB Trainer Revision 3.doc
20
1
Duck
4
Sound
Flashing Green
(Program Mode)
For One Launcher:
Step 1
At the Receiver
Move the receiver toggle switch to the left
(program mode). ”Program” and “On” lights
are on, then the “On” light turns off.
At the Transmitter
Step 2
Ensure that the transmitter is off (Red “Safety” light
off).
Press the “
PROG
” key
Red “
Armed
” light turns on.
Step 3
Press the blue
“4 Sound”
key in the
middle column. One of the lights along the left side of
the keypad goes on as a result of previous settings. On
a new unit it will probably be the green “
1 Duck”
key in
the left column.
Standard Sound system, go to step 5.
Step 4
. (Advanced Sound only)
Select the desired sound by pressing the key
describing that source in the sound column. The red
light along the left edge of the transmitter will indicate
your sound selection.
PROG
BB Trainer Revision 3.doc
21
2
Gunner
Pos.
1
Model
2
Pheasant
4
Goose
1
Duck
3
Daisy
Ch.
3
Human
Low Batt.
Step 5
Press the red
“3 Daisy Ch.”
key
in the
middle column. Low battery light goes on. If not, press
the green
“1 Duck”
key in the left
column.
Step 6
Press the yellow
“2 Gunner Pos.”
key.
This allows you to select the key color that
will control that launcher. If your unit has not previously
been programmed the
“Low Batt.”
light will normally go on.
Select the 1-4 for the button color you want to
control that launcher. For one launcher press
the green “1 Duck” key in the left column.
The “Low battery” light next to that key will light if it
was not already on. If you are programming
additional launchers select the desired number and
color in the left column.
Step 7
Press the green
“1 Model”
key at the top
of the middle column to set the transmitter for selecting
the Bumper Boy model. Select the model of launcher
you are programming as follows:
o
For the 2 Shooter press the yellow
”2
Pheasant”
key.
o
For the 4 Shooter press the blue
“4 Goose“
key..
o
For the 8 or 12 shooter press the red
“3 Human”
key.
The light beside the selected key should be on.
