5
When assembling your portable basketball net, you will need to follow these steps:
1.
Mounting the base and the lower pole:
Remove and insert the wheel shaft 3. into the holes of the front of the base 2.
Attach one of the 2 ends of the support rods 14. and 15. at the base with the bolts
(two screws 13., a safety washer 9., two nut washers 12. and a nut 8.). Then aim the
other two ends of the support rods 14. and 15. on the outer pole 4. using the screw
16., nut washer 17. and nut 18.
2.
Assembly of the basketball hoop/net, panel and upper pole:
Assemble the basketball net 6. (hoop + net), panel 7. and upper poLe 22. using screw
5., nut 24. and nut washer 32.
3.
Mounting of the panel fixing rods:
Hook the fixing rods 27., 28. and 29. on the top of the upper pole 22. with screws 23.
and 31., the nut washers 25. and 30. and the nut 26.
4.
Assembly of the middle pole to the outer pole:
Insert the middle pole 19. into the outer pole 4. using the locking screw 20. to block
the system.
5.
Assembly of the middle pole to the upper pole:
Insert the upper pole 22. into the middle pole 19. The height is adjustable as needed.
To lock the system, use the locking screw 21.
6.
Fill the base with water and / or sand, insert the seal 10. into the hole and close with
the plastic plug 11.
ENGLISH
ASSEMBLY OF BASKETball stand
