Table of figures
034-03212_1.0_03.12.2018
168
10.4
Table of figures
Figure 1:
Type plate, example, 17
Figure 2:
Bicycle viewed from the right; Lacube EVO Lite 5 used as
example, 24
Figure 3:
Detailed view of bicycle from rider position, example, 25
Figure 4:
Components of the wheel – example showing front
wheel, 26
Figure 5:
Rim brake components with details; Magura HS22 used
as an example, 28
Figure 6:
Rim brake locking lever,
closed (1) and open (2), 29
Figure 7:
Bicycle brake system with a disc brake, example, 30
Figure 8:
Brake system with a back-pedal brake, example, 31
Figure 9:
Bicycle without suspension (1) and with suspension (2)
when riding over an obstacle, 32
Figure 10:
Example showing Suntour fork: The stem and handlebars
are fastened to the fork shaft (1). The wheel is fastened to
the quick release axle (6). Other elements: The
compression setting (2), crown (3), Q-Loc (5), dust
seal (6), fork end for quick release (7), stanchion (8) and
spring (9), 33
Figure 11:
Air suspension fork structure, Suntour, 34
Figure 12:
Diagram of drive system, 35
Figure 13:
Diagram of electric drive system, 36
Figure 14:
Evo 650 battery details, 38
Figure 15:
Display details, 40
Figure 16:
On-screen indicators overview, 41
Figure 17:
Operating element overview, 45
Figure 18:
Fastening the transport securing device, 51
Figure 19:
Bicycle brake system with a disc brake, example, 54
Figure 20:
Fully inserting the axle, 60
Figure 21:
Tightening the axle, 60
Figure 22:
Pushing the quick release lever into the axle, 61
Figure 23:
Tightening the securing screw, 61
Figure 24:
Tightening the inserted axle, 62
Figure 25:
Tightening the axle, 62
Figure 26:
Pushing the axle into the hub, 64
Figure 27:
Tightening the axle, 64
Figure 28:
Pushing the quick release lever into the axle, 65
Figure 29:
Securing the lever, 65
Figure 30:
Perfect position for the clamping lever, 66
EN_034-03212_1.0_BULLS Brose Center MY19_Inhalt.book Page 168 Monday, December 3, 2018 9:37 AM