The Geofence Alert noti
fi
es you if the tracker either enters into or exits out of a geographic area that is set
via the app:
Fig. 4
A geo-fence is a pre-de
fi
ned area on a map and by using geo-fences you can be alerted if your tracker
travels into or out of that area. You can select whether you want an alert when the tracker crosses the
boundary whilst travelling INTO the geo-fence or travelling OUT of the geo-fence.
Once a geo-fence is set up ‘
Enable’
, you will receive the required alert every time the geo-fence boundary
is crossed. To stop receiving the alerts you must ‘
Disable’
the geo-fence.
The
Bulldog TR35
supports up to 2 geo-fences via the smartphone app.
Enable
Tap
Menu,
Management, Command, Set a geo-fence.
Tap
Geo Fence Number
and select the number to assign to the geofence
.
Zoom in on the map to display the centre of the required geofence.
Tap the map to activate the centre of the required geofence.
8.
GE
O-FENCE ALER
TS
Edit
Geofence diameter
slider
Exit Switch
Enter Switch
Geo Fence
Number
The Speed Alert noti
fi
es you if the tracker exceeds a preset speed
Enable
Tap
Menu,
Management, Command, Set the Speeding alarm
.
In
Max Speed (kmh):
enter a speed over which you want to receive a push noti
fi
cation (e.g. 70 km/h). Tap
Con
fi
rm
.
When your tracker exceeds the set speed limit a push noti
fi
cation will be shown on your smartphone .
Disable
Tap
Menu,
Management, Command, Set the Speeding alarm
.
In
Max Speed (kmh):
enter
0
Tap
Con
fi
rm
.
Speed alerts are now disabled.
The
Status
screen will display after each command is set. After a few seconds if the command is
successful
Status:
Send successfully
will be displayed. If an error is displayed e.g.
Tracker is o
ff
-line
, try
again later.
7.
S
P
E
E
D
A
LE
R
T
S
TR35/201805-15/GEN
NO
1
