operations
6
Cautions & Limitations
For CC20 airline respirators
A - Not for use in atmospheres containing less than 19.5% oxygen.
B - Not for use in atmospheres immediately dangerous to life or health.
C - Do not exceed maximum use concentrations established by regulatory standards.
D - Airline respirators can be used only when respirators are supplied with respirable
air meeting the requirements of CGA G-7.1 Grade D or higher quality.
E - Use only the pressure ranges and hose lengths specified in the instruction
manual.
J - Failure to properly use and maintain this product could result in injury or death.
M - All approved respirators shall be selected, fitted, used, and maintained in accor-
dance with MSHA, OSHA, and other applicable regulations.
N - Never substitute, modify, add, or omit parts. Use only exact replacement parts in
the configuration as specified by the manufacturer.
O - Refer to users instructions, and/or maintenance manuals for information on use
and maintenance of these respirators.
S - Special or critical User’s Instructions and/or specific use limitations apply. Refer
to User’s Instructions before donning.
operations
Protection
respiratory
The CC20 respirator is NIOSH approved (TC-19C-154) as a Type C continuous-flow
supplied air respirator. It can be worn for general purpose applications, including
pharmaceutical manufacturing, chemical and pesticide handling, tank cleaning,
spray painting, and other industrial or agricultural applications in which hazardous
compounds are present.
The CC20 respirators are not approved for use in any atmosphere immediately dan-
gerous to life or health (IDLH), or from which the wearer cannot escape without the
aid of the respirator. IDLH is defined in 29 CFR 1910.134(b).
Head
CC20 Series respirator hoods with the 20TG or 20RT headband suspension DO NOT
provide head protection. If head protection is required, order the 20TICH or 20SICH
model.
The 20TICH and 20SICH hoods, when used with a Bullard model S51 or C30 hard hat,
meet ANSI Standard Z89.1-2003 Type I, Classes E & G requirements for protective
headwear for industrial workers. These hard hats are designed to provide limited head
protection by reducing the force of falling objects striking the top of the hard hat shell.
Face
The 20TICH and 20SICH models meet ANSI Z87.1-2003 impact and penetration
requirements for face protection. The 0.040” acetate lens provides limited face
protection from flying particles or spray of hazardous liquids, but is not shatterproof.
eyes
CC20 Series respirators DO NOT provide eye protection. Wear approved safety
glasses or goggles at all times when eye protection is required.
ears
CC20 Series respirators DO NOT provide hearing protection. Use properly fitted
earmuffs, earplugs or other protection when exposed to high noise levels.
