Bullard CC20 Series User Manual Download Page 31

Page: 31 / 32

Ordering Information

Blower Assemblies

EVAHL1

Blower unit only

EVAHL2

Blower unit, belt, battery and charger

EVAHL3

Blower unit, belt, battery

Replacement Batteries and Chargers

EVAHLSMC

Quick charger (1 port)

EVAHLGC

Table top gang charger (6 ports)

EVAHLBAT1

Lithium Polymer Battery Pack (Black)

Replacement Cartridges

PAPRFC3

HE (6 per box)

PAPRFC4

OV/AG/HE (6 per box)

PAPRFC5

AM/FM/MA/AG/HE (6 per box)

Respirator Hoods (“T” suffix designates thread connection)

Single bib hood, for use with headband suspension

20TJ, 20TJT

Tychem 2000 (QC) 20RT headband suspension

20TJN , 20TJNT

Tychem 2000 (QC) No headband suspension

Double bib hood for use with headband suspension

20TIC, 20TICT

Tychem 2000 (QC) 20RT headband suspension

20TICN, 20TICNT   Tychem 2000 (QC) No headband suspension
20TICS, 20TICST   Tychem 2000 (QC) 20RT headband suspension, taped and sealed seams
20TICSN, 20TICSNT  Tychem 2000 (QC) No headband suspension, taped and sealed seams,
20SIC, 20SICT

Tychem 4000 (SL) 20RT headband suspension, taped and sealed seams

20SICN, 20SICNT Tychem 4000 (SL) No headband suspension, taped and sealed seams
20SICV, 20SICVT Tychem 4000 (SL)20RT headband suspension, taped and sealed seams,

PVC lens

20SICVN, 20SICVNT Tychem 4000 (SL) No headband suspension, taped and sealed seams, PVC

lens

Double bib hood for use with Bullard hard hat (“T” suffix designates thread

connection)

20TICH, 20TICHT Tychem 2000 (QC) Hard hat not included
20SICH, 20SICHT Tychem 4000 (SL) Hard hat not included, taped and sealed seams
20SICVH, 20SICVHT Tychem 4000 (SL) Hard hat not included, taped and sealed seams, PVC lens

Loose fitting facepieces with sewn-in suspension

20LFXL

Tychem 2000 (QC), Extra large

20LFL

Tychem 2000 (QC), Large

20LFM

Tychem 2000 (QC), Medium

20LF2L

Tychem 2000 (QC), Large, narrow profile

20LF2M

Tychem 2000 (QC), Medium, narrow profile

20LF2S

Tychem 2000 (QC), Small, narrow profile

Double bib hood for use without a headband suspension

RT1, RT1T

Tychem 2000 (QC), Inflatable neck collar

RT2, RT2T

Tychem 4000 (SL), Inflatable neck collar

RT3, RT3T

Tychem 2000 (QC), Sport neck collar

RT4, RT4T

Tychem 4000 (SL), Sport neck collar

Accessory Items for Hoods

20LCL

Mylar lens covers, CC20 Series (25/pkg)

RTLC

Mylar lens covers, RT Series (25/pkg)

Headband Suspensions and Hard Hats

20TG

Standard headband suspension

20RT

Sure-Lock

ratchet headband suspension

30WHP

Hard hat with standard suspension, white

30WHR

Hard hat with ratchet suspension, white

51WHP

Hard hat with standard suspension, white

51WHR

Hard hat with ratchet suspension, white

Accessories for Headbands Suspension and Hard Hats

RS6PC

Standard replacement suspension for 30WHP hard hat

RS6RC

Replacement ratchet suspension for 30WHR hard hat

RS4PC

Standard replacement suspension for 51WHP hard hat

RS4RC

Replacement ratchet suspension for 51WHR hard hat

20NC

Chinstrap for 20TG and 20RT headband suspension

ES42

Chinstrap for C30 and S51 hard hats

Replacement Parts and Accessories

EVABELT1

Replacement belt

EVABELT2

Vinyl belt

PAPRSUSP1 Suspenders
EVAEXT1

Extension belt kit

PAPRSUSP1

PAPR suspenders (1 pair)

PA1AFI

Air flow indicator

PAHBT

Powered air hood breathing tube assembly; standard length

PAHBTXS

Powered air hood breathing tube assembly; short length

PAHBTXL

Powered air hood breathing tube assembly; long length

PA1BT

Hood breathing tube assembly; includes tube and clamp; standard length

PA1BTXS

Hood breathing tube assembly; includes tube and clamp; short length

PA1BTXL

Hood breathing tube assembly; includes tube and clamp; long length

PA20LFBT

Loose fitting facepiece breathing tube assembly; standard length

PA20LFBTXS

Loose fitting facepiece breathing tube assembly; short length

PA20LFBTXL

Loose fitting facepiece breathing tube assembly; long length

PA1BTS

Breathing tube/cartridge seal

S18051

Breathing tube clamp (10/pack)

EVAHL Series Hazardous Location Powered Air-Purifying

Respirator Blower Assembly User Manual

dering Inf

ormation

Summary of Contents for CC20 Series

































Search results

Summary of Contents for CC20 Series

Reviews:

Related manuals for CC20 Series

Brands by name

Popular brands

Bullard CC20 Series, User Manual

Search results

Summary of Contents for CC20 Series

Reviews:

Related manuals for CC20 Series

Brands by name

Popular brands