Bull NovaScale R410B F2, Getting Started

Page: 12 / 38

8
Getting Started With Your System
7 USC or USC - LCE extracts the drivers required by the operating system you
selected.
NOTE:
USC or USC-LCE provide the drivers to the operating system through the
OEMDRV directory.
NOTE:
For Microsoft Windows operating system, the drivers are extracted to an internal
USB drive named OEMDRV.
NOTE:
The process for extracting the drivers may take several minutes.
NOTE:
All drivers copied by the OS Deployment wizard are removed after 18 hours.To
remove the drivers before the 18-hours period is over, reboot the system and press the <F10>
key to re-enter USC.
8 After the drivers are extracted, USC or USC - LCE prompts you to insert the
operating system installation media.
9 Insert the operating system installation media when prompted and click
Next
.
NOTE:
USC-LCE supports internal SATA optical drives, USB optical drives, and virtual
media devices. If the installation media is corrupt or not readable, then USC may be unable to
detect the presence of a supported optical drive. In this case, you may receive an error
message stating that no optical drive is available. If the media is not valid (if it is the incorrect
CD or DVD, for example), a message displays requesting that you insert the correct
installation media.
10 Click Finish to reboot the system and continue with the operating system
installation. Upon reboot, the system boots to the operating system
installation media.
NOTE:
When the system reboots after you click Finish, you may be prompted to press a
key before booting to the operating system installation media. If you do not press a key, the
system boots to the hard drive and not the operating system installation media.
NOTE:
: In the event that the operating system installation is interrupted and the system
reboots before installation completes, you may be prompted to press a key in order to boot
from the operating system installation media.
NOTE:
You can cancel the operating system installation by pressing the <F10> key.
Pressing the <F10> key at any point during the installation process or while rebooting causes
any drivers provided by the OS Deployment wizard to be removed.