Bull NovaScale Blade B260+, Installation And User Manual, Page: 60 / 74

46
NovaScale Blade B260+ - Installation and User's Guide
4.7 Configuring a RAID array
An optional expansion unit may be installed to create a RAID array. If a RAID array is
configured on the expansion unit, you can not add the blade server SAS hard disk drive to
the RAID array. See the documentation for your expansion unit for configuring a RAID
array. The operating system installed on the blade server must support RAID.
4.8 Using the LSI Logic Configuration Utility program
You can use the LSI Logic Configuration Utility program to:
•
Set the SAS device scan order
•
Set the SAS ID for the controller
To start the LSI Logic Configuration Utility program, complete the following steps:
1. Turn on the blade server, and make sure that the blade server is the owner of the
keyboard, video, and mouse.
2. When the
<<<Press Ctrl-C to start LSI Logic
Configuration Utility>>>
prompt is displayed, press Ctrl-C.
3. Use the arrow keys to select the controller from the list of adapters; then, press Enter.
4. Follow the instructions on the screen to change the settings of the selected items; then,
press Enter. If you select RAID Properties, SAS Topology or Advanced Adapter
Properties, additional screens are displayed.