Bull ESCALA 7214, Service Manual

Page: 15 / 70

About This Guide
This guide describes how to service the 7214 Model 1U2 Storage Device Enclosure.
It contains the following chapters:
Chapter 1, “General Information,” describes the 7214 Storage Enclosure, gives the
system requirement, discusses cables, and lists hardware specifications.
Chapter 2, “Maintenance Analysis Procedures,” provides the maintenance analysis
procedures (MAPs) required to service the 7214 Model 1U2 Storage Device
Enclosure.
Chapter 3, “Removal and Replacement Procedures,” provides the removal and
replacement procedures required to service the 7214 Model 1U2 Storage Device
Enclosure.
Chapter 4, “Servicing the DAT 72, 4mm Tape Drive,” describes procedures to
follow when a problem is detected with an installed DAT 72 tape drive feature.
Chapter 5, “Servicing the DVD Drives,” describes procedures to follow when a
problem is detected with an installed DVD drive features.
Chapter 6, “Parts Diagram and Parts List,” provides the parts diagram and parts
list required to service the 7214 Model 1U2 Storage Device Enclosure.
Appendix A, “Power Cables,” provides power cable information for different
countries.
Appendix B, “Safety Inspection Procedures,” provides procedures to identify
unsafe conditions when servicing the 7214 Storage Enclosure.
Store this guide with your system manuals.
Note:
Service actions involving the removal of the enclosure cover must be
performed by an IBM authorized service representative.
Related Publications
v
7214 Model 1U2 Storage Device Enclosure Setup and Operator Guide, SA23-2302,
provides information about installing and operating the 7214 Storage Enclosure.
v
IBM Externally Attached Devices Safety Information SA26-2004, provides
translations of danger and caution notices.
© Copyright IBM Corp. 2007
xiii