16
TO LIGHT GRILL WITH A FIREPLACE-TYPE MATCH
1.
NOTE:
To light gas grill with a fireplace-type match
, follow steps 1 through 6 above. Remove cooking grid and
flame tamer from burner you wish to light. Using provided Lighting Rod to hold a lighted fireplace type match or long-
necked butane lighter placing flame near to burner ports. Press in control knob and rotate left to “HIGH” setting to
release gas per illustration below:
Burner should light immediately. If more than one burner is needed, repeat procedure with each burner.
2.
Replace flame tamer and cooking grid. Turn off burners not needed and adjust other burners to desired cooking temperature.
COOKING COMPONENT INSTALLATION, CAUTION, BEFORE YOU START:
1)
Turn off the gas supply at the gas supply source first
2)
It is recommended you protective gloves to operate the grill when handling any components with transferred
heat temperature.
3)
Do not move the grill during use.
4)
Check gas valve orifices, burner tubes and burner ports for any obstructions
PER DRAWING BELOW:
5)
Place stainless steel heat shields on lowest ledge under / between burners in grill insert.
6)
Place stainless steel flame tamers on lower ledge above burners in grill insert.
7)
Place cooking grates in grill insert on ledge above flame tamers.
8)
Please read Safety, Lighting and Operating Instructions carefully.
NOW YOUR GAS GRILL IS READY TO USE!
WARNING:
ANY MODIFICATION OF THE APPLIANCE MAY BE DANGEROUS TO YOU
OR OTHERS AND MAY VOID PRODUCT WARRANTY
Summary of Contents for 69008
Page 5: ...4 ...
