background image

SAFETY INSTRUCTIONS

This Sidekick Sideburner must be installed in accordance with local codes or, if in an area without local codes, with the latest edition of the National 

Fuel Gas Code ANSI Z223.1. In Canada, installation must conform to the standard CAN/ CGA 1-b149.1 and/or .2 (Installation Code for Gas 

Burning Appliances and Equipment) and any local codes. Outside the United States, installation must conform with the latest edition of CE Norms 

EN498. Parts that are sealed by the manufacturer or agent must not be altered by the user.

WARNING

: Fuels used in gas or oil-fired appliances and the products of combustion of such fuels, contain chemicals known to the State of 

California to cause cancer, birth defects and/or reproductive harm. This warning is issued pursuant to California Health & Safety Code Sec. 

25249.6.

THE LOCATION FOR YOUR SIDEKICK SIDEBURNER

DO NOT use your Sidekick Sideburner in garages, porches, breezeways, sheds or other enclosed areas.

Your sideburner is to be used 

OUTDOORS ONLY

, with at least 

21 inches/54 cm/533 mm

clearance from the back and side of any combustible surface. The sideburner should 

not be placed under or on top of any surface that will burn. Do not obstruct the flow of combustion and ventilation air around the insert.

PROTECT CHILDREN: 

Keep children away from the sideburner during use and until it has cooled after you are finished. Do not allow children to 

operate the sideburner.

CHECKING FOR GAS LEAKS

NEVER TEST FOR GAS LEAKS WHILE THE SIDEKICK SIDEBURNER IS LIT!

Prior to the first use and at the beginning of each new season (or, 

if using LP, whenever gas cylinder is changed), it is a must that you check for gas leaks. Follow these steps:
1. Make a soap solution by mixing one part liquid detergent and one part water.
2. Turn off the heat control valve, and then turn on gas at source.
3. Apply the soap solution to all gas connections: bubbles will appear in the soap solution if connections are not properly sealed. Tighten or repair 

as necessary.
4. If you have a gas leak that you cannot repair, turn off the gas at the source, disconnect fuel line from the sideburner and immediately call your 

dealer and gas supplier for professional assistance.

2

WARNING! FOR YOUR SAFETY...
- DO NOT store or use gasoline or other flammable vapors and liquids in the vicinity of this or 

any other appliance.
- DO NOT store empty or full spare gas cylinders and/or chemicals under or near this or any 

other appliance.
- Keep the fuel hose away from hot surfaces. Protect the fuel hose from dripping grease. Avoid 

unnecessary twisting of the hose. Visually inspect the hose prior to each use for cuts, cracks 

excessive wear or other damage and replace if necessary.
- NEVER test for gas leaks with a lighted match or open flame.
- NEVER light the sideburner with lid closed or before checking to ensure ventri tube is fully 

seated inside gas valve orifice.
- NEVER lean over cooking surface while lighting the sideburner. Use barbecue tools with wood 

handles and good quality insulated oven mitts when operating the sideburner.
DANGER! IF YOU SMELL GAS...
1. Shutoff gas to the appliance at its source.
2. Extinguish any open flame.
3. Open the sideburner lid to release any accumulation of fumes.
4. If gas odor persists

immediately contact your gas supplier or your fire department.

READ CAREFULLY BEFORE ASSEMBLY AND OPERATION OF YOUR SIDEKICK SIDEBURNER

Summary of Contents for 60010
















Reviews: