Bull Cedoc Bull Escala 2104 TS4, Installation Manual

Page: 69 / 87

Invalid configurations
This section gives examples of configurations that are invalid.
Two adapters in one host system connected to one 2104 Model TS4
Figure 43 shows two adapters in one host system connected to one 2104 Model
TS4 (single-bus mode).
1
SCSI interface card.
2
SCSI adapter. This configuration is invalid for any type of adapter.
Note: This configuration is invalid when the2104 Model TS4 is configured in
single-bus mode, but is valid when the 2104 Model TS4 is configured in
dual-bus mode. See page 36.
2104 Subsystem
1 1
2
2
X
Host System
Figure 43. Two adapters in one host system connected to one 2104 Model TS4 (single-bus
mode). This configuration is invalid.
Appendix B. Cable configurations
41