BFEWS IOM MANUAL R0 160721
14
13.2
Remote configuration
Most of the intermediate steps are similar to the Integral version, except the fact that the Stand pole and
Boom are mounted with a separation between each other as illustrated below.
Step
Illustration
Mount the Sensor boom closer to the
water body.
Mount the weatherproof Stand pole
housing the Communicator, battery and
the solar panel remotely.
Lay a rugged cable conduit below the
ground level from the Stand pole to the
Boom and run the sensor cable through it.
Note: For username and password, contact -
Email:
Phone: +91 8010849867
