Safety Instructions
• Please keep this User Guide for future consultation. If you sell the unit to another user,
be sure that they also receive this instruction booklet.
• Always make sure that you are connecting to the proper voltage, and that the line
voltage you are connecting to is not higher than that stated on the decal or rear panel
of the fixture.
• Make sure there are no flammable materials close to the unit while operating.
• Always disconnect from power source before servicing or replacing fuse and be sure to
replace with same fuse source.
• Secure fixture to fastening device using a safety chain.
• Maximum ambient temperature (Ta) is 95°F (35°C). Do not operate fixture at
temperatures higher than this.
• In the event of a serious operating problem, stop using the unit immediately. Never try to
repair the unit by yourself. Repairs carried out by unskilled people can lead to damage
or malfunction. Please contact the nearest authorized technical assistance center.
Always use the same type spare parts.
• Don’t connect the device to a dimmer pack.
• Make sure the power cord is never crimped or damaged.
• Never disconnect the power cord by pulling or tugging on the cord.
• Avoid direct eye exposure to the light source while it is on.
• Do not daisy chain power to more than 20 units at 120V, or 40 units at 230V.
Caution! There are no user serviceable parts inside the unit. Do not open the
housing or attempt any repairs yourself. In the unlikely event your unit
may require service, please contact your vendor
4
Please read these instructions carefully, which includes
important information about the installation, usage and
maintenance of this product.
ORDER DIRECTLY TODAY AT:
www.BulbAmerica.com
or CALL TOLL FREE 888-505-2111
