7
Personal safety
Use safety equipment. Always wear eye protection. Using safety equipment such as a
dust mask, non-skid safety shoes, a hard hat, or hearing protection whenever it is needed
will reduce the risk of personal injury.
Avoid accidental starts. Ensure the switch is in the off position before inserting the plug.
Carrying power tools with your finger on the switch or plugging in power tools when the
switch is in the on position makes accidents more likely.
Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and
gloves away from the power tool. Loose clothes, jewellery or long hair can become
entangled in the moving parts.
Service
Your power tool should be serviced by a qualified specialist using only standard spare parts. This
will ensure that it meets the required safety standards.
Specific safety instructions for rotary hammer
Always use the auxiliary handle for maximum control.
Do not touch the bit after operation. It could be very hot.
Application
The rotary hammer is intended for personal use for drilling and chiselling of : wood, metal, plastic,
masonry, concrete.. IT IS NOT DESIGNED FOR PROFFESIONAL USE.
Description
1. SDS Drill
2. Dust cap
3. SDS Chuck
4. Dril stop
5. ON/OFF switch
6.AVS system (Anti Vibration System)
7.Power cord
8. Auxiliary handle
9. Depth stop
Accessories included
1 SDS MAX drill
φ
18 X250 mm
1 SDS MAX chisel ( 250mm );
1 SDS MAX dorn ( 250mm );
1 depth gauge;
1 dust cap;
1 grease box;
1 pair brushes
Assembly
Disconnect the power plug before carrying out any adjustments or maintenance.
