Build Worker 5411074157999, Original Instructions Manual

Page: 56 / 61

56
CARRYING TOOL
Make sure that the tool is unplugged. Secure
the blade at 0° bevel angle and the turn base at
the full right miter angle position.
Lower the handle fully and lock it in the lowered
position by pushing in the stopper pin.
Carry the tool by holding both sides of the tool
base as shown in the figure. If you remove the
holders, dust bag, etc., you can carry the tool
more easily.
CAUTION:
• Always secure all moving portions before
carrying the tool. If portions of the tool move or
slide while being carried loss of control or
balance may occur resulting in personal injury.
STORAGE
_ Thoroughly clean the whole machine and its
accessories.
_ Store it out of the reach of children, in a stable
and secure position, in a cool and dry place,
avoid too high and too low temperatures.
_ Protect it from exposure to direct sunlight.
Keep it in the dark, if possible.
_ Don’t keep it in plastic bags to avoid humidity
build-up.
GUARANTEE
Refer to the enclosed guarantee conditions
for the terms and conditions of guarantee.
ENVIRONMENT
Should your machine need
replacement after
extended use, do not put it
in the domestic waste but
dispose of it in an
environmentally safe way.
Made in China 2014