Buick Regal 2012, Owner'S Manual

Page: 106 / 452

Black plate (52,1)
Buick Regal Owner Manual - 2012
3-52 Seats and Restraints
If more than one child restraint
needs to be installed in the rear
seat, be sure to read
Where to
Put the Restraint on page 3 ‑ 42 .
1. Put the child restraint on
the seat.
If the head restraint interferes
with the proper installation of
the child restraint, the head
restraint may be removed.
See
“ Head Restraint Removal
and Reinstallation ” under
Lower Anchors and Tethers for
Children (LATCH System) on
page 3
‑ 43 .
2. Pick up the latch plate, and run
the lap and shoulder portions of
the vehicle's safety belt through
or around the restraint. The child
restraint instructions will show
you how.
3. Push the latch plate into the
buckle until it clicks.
Position the release button on
the buckle so that the safety belt
could be quickly unbuckled if
necessary.
4. Pull the shoulder belt all the way
out of the retractor to set the
lock. When the retractor lock is
set, the belt can be tightened but
not pulled out of the retractor.