13
Driver Shift Control is a manual mode that
allows the driver to manually select the range
of gear positions. It can be used to drive in a
sportier manner or to downshift when driving
on a downhill grade to provide engine braking.
1. Move the shift lever to the Manual (M)
position.
2. Press the
+
(plus) or
–
(minus) button on the
shift lever to upshift or downshift. The current
gear will be displayed on the Driver Information Center.
If vehicle speed is too high or too low for the requested gear, the shift will not occur.
See Driving and Operating in your Owner's Manual.
CRUISE CONTROL
Setting Cruise Control
1. Press the
On/Off
button. The
Cruise Control
symbol will illuminate in
white on the instrument cluster.
2. When traveling at the desired speed,
rotate the thumbwheel down to the
SET
position to set the speed. The
symbol will illuminate in green on the
instrument cluster.
Cancel
Press to cancel the Cruise Control but retain
the set speed in memory.
Pressing the brake pedal also will cancel
the Cruise Control.
Turn off Cruise Control or the vehicle igni-
tion to erase the set speed.
Adjusting Cruise Control
RES/+ Resume/Accelerate
Rotate the thumbwheel up to resume a set
speed. When the system is active, rotate
the thumbwheel up to increase speed.
SET/– Set/Coast
When the system is active, rotate the thumb-
wheel down to decrease speed.
See Driving and Operating in your Owner's Manual.
TIRE PRESSURE MONITOR
The
Low Tire Pressure warning light on the instrument cluster illuminates when one or
more of the vehicle’s tires is significantly underinflated. Fill the tires to the proper tire pres-
sures listed on the Tire and Loading Information label located below the driver’s door latch.
Current tire pressures can be viewed on the Driver Information Center Information menu.
Refer to your Owner's Manual for additional information about normal monthly tire maintenance.
See Vehicle Care in your Owner's Manual.
AUTOMATIC TRANSMISSION
