Buick Regal Owner Manual (GMNA-Localizing-2nd Timed Print-U.S./Canada-
11486030) - 2018 - crc - 3/23/18
300
Vehicle Care
17. If the flat tire was able to inflate
to the recommended inflation
pressure, remove the
maximum speed label from the
sealant canister and place it in
a highly visible location.
Do not exceed the speed on
this label until the damaged tire
is repaired or replaced.
18. The sealant canister cannot be
removed from the compressor.
See your dealer to have the
canister replaced.
19. Return the sealant/air hose (6)
and power plug (5) back to
their original storage location.
20. Store the tire sealant and
compressor kit in the load
compartment.
21. Wipe off any sealant from the
wheel, tire, or vehicle.
22. After temporarily sealing a tire
using the tire sealant and
compressor kit, take the
vehicle to an authorized dealer
within 161 km (100 mi) of
driving to have the tire repaired
or replaced.
Using the Tire Sealant and
Compressor Kit without
Sealant to Inflate a Tire (Not
Punctured)
The kit includes:
1. Tire Sealant Canister
2. Sealant Canister Inlet Valve
3. Pressure Gauge
4. Compressor
5. Power Plug
6. Sealant/Air Hose
7. On/Off Button
If a tire goes flat, avoid further tire
and wheel damage by driving slowly
to a level place. Turn on the hazard
warning flashers. See
See
for
other important safety warnings.
1. Remove the compressor from
its storage location.
See
and Compressor Kit (With
Subwoofer)
or
the Tire Sealant and
Compressor Kit (Without
Subwoofer)
.
2. Remove the sealant/air hose
(6) and the power plug (5) from
the bottom of the compressor.
3. Place the compressor on the
ground near the flat tire.
