manualshive.com logo in svg

Buick 2005 Park Avenue, Owner'S Manual

The Buick 2005 Park Avenue Owner's Manual is your go-to resource for understanding and maintaining your vehicle. This essential manual covers every aspect of your Park Avenue, allowing you to confidently navigate its features and troubleshoot issues. Download it for free from our website, manualshive.com, and unlock a wealth of information at your fingertips.

Share
Download
background image

5. Fill the radiator with the proper DEX-COOL

®

coolant

mixture, up to the base of the filler neck. See
Engine Coolant on page 5-24 for more information
about the proper coolant mixture.

If you see a stream of coolant coming from an air
bleed valve, close the valve. Otherwise, close
the valve after the radiator is filled.

6. Rinse or wipe any spilled coolant from the engine

and the compartment.

7. Replace the 3800 Series II V6 engine cover shield.

7.1. Remove the oil fill tube, with cap attached,

from the valve cover.

7.2. Insert the catch tab on the cover shield

under the bracket on the engine.

7.3. Place the hole in the cover shield over the

hole in the valve cover. Install oil fill tube and
cap by twisting clockwise.

7.4. If you have the supercharged engine, install

the nut in the center of the cover shield.

8. Then fill the coolant recovery tank to the FULL

COLD mark.

9. Put the cap back on the coolant recovery tank, but

leave the radiator pressure cap off.

5-33

Summary of Contents for 2005 Park Avenue





































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2005 Park Avenue

EAL Formula 523585 Assembly Instructions preview
Formula 523585
Brand: EAL Pages: 4
Jeep PATRIOT 2013 Specifications preview
PATRIOT 2013
Brand: Jeep Pages: 5
Jeep PATRIOT 2012 Specifications preview
PATRIOT 2012
Brand: Jeep Pages: 6
Jeep Grand Cherokee SRT 2014 Operating Manual preview
Grand Cherokee SRT 2014
Brand: Jeep Pages: 345
Jeep Grand Cherokee 2015 User Manual preview
Grand Cherokee 2015
Brand: Jeep Pages: 236
Jeep Grand Cherokee Quick Manual To Repairs preview
Grand Cherokee
Brand: Jeep Pages: 18
Jeep Grand Cherokee Quick Reference Manual preview
Grand Cherokee
Brand: Jeep Pages: 24
Jeep Compass 2015 Owner'S Manual preview
Compass 2015
Brand: Jeep Pages: 560
Jeep Compass 2013 Owner'S Manual preview
Compass 2013
Brand: Jeep Pages: 525
Jeep Cherokee 2019 User Manual preview
Cherokee 2019
Brand: Jeep Pages: 308
Jeep CHEROKEE 2017 Manual preview
CHEROKEE 2017
Brand: Jeep Pages: 86
Jeep CHEROKEE 2017 Owner'S Manual preview
CHEROKEE 2017
Brand: Jeep Pages: 638
Jeep 2022 CHEROKEE Quick Start Manual preview
2022 CHEROKEE
Brand: Jeep Pages: 9
Jeep 2014 Patriot Service Information preview
2014 Patriot
Brand: Jeep Pages: 51
Jeep Jeep Wrangler Buyer'S Manual preview
Jeep Wrangler
Brand: Jeep Pages: 4
Jeep Jeep Wrangler Owner'S Manual Supplement preview
Jeep Wrangler
Brand: Jeep Pages: 50
Jeep Grand Cherokee SRT 2014 Owner'S Manual preview
Grand Cherokee SRT 2014
Brand: Jeep Pages: 118
Jeep 2014 Grand Cherokee Accessories Quick Reference Manual preview
2014 Grand Cherokee
Brand: Jeep Pages: 24

Brands by name

Popular brands

Load more brands