Repairs
29
6.5
Replacing the cover gasket
Tools needed
• 1 small screwdriver
If the changed cover pressure does not eliminate the leakage, then the cover gasket (C9)
must be replaced. The replacement is possible without dismantling the cover:
1. Remove the cover gasket (C9) from its groove with the small screwdriver.
2. Press the new cover gasket in the groove in such a way that it fits evenly all along the
groove.
7
Repairs
Repairs other than those described in this Operating Manual may be undertaken only
by persons appointed by the manufacturer or other technically competent persons using
BÜHNEN original replacement parts.
8
Warranty
The device has been developed and manufactured in accordance with the most up-to-
date technical knowledge. We provide the initial purchaser with a warranty according to
statutory requirements for function, materials and processing. Normal wear and tear is
excepted.
The warranty ends if improper treatment, use of force, repairs by third parties or the fitting
of non-original replacement parts is evident.
The warranty covers repair or replacement at our discretion. A warranty extending beyond
the kit supplied by us is precluded, since proper and expert use of the device is outside
our control.
Please note our terms of business!
9
Disposal
Pass the device, packing and fittings for environmentally correct recycling/reuse (in ac-
cordance with European Parliament and Council Directive 2002/96/EC of 27th January
2003).
GB
