Buhnen HB 5010, Translation Of The Original Operating Manual

Page: 83 / 142

Specific safety instructions
5
1 Specific safety instructions
1.1 Potential hazards
Burn Hazard
due to hot metal parts, hot melt material, and hot melt material vapors. Therefore, always
wear heat protection gloves.
1.2 Scope of use
The manual application unit is for the melting and metered discharge of melts (thermopla-
stic substances such as hot-melt adhesives, waxes, etc.) as a bead or spray-on coating.
When processing reactive hot melt adhesives, such as polyurethane (PU) hot melt adhe-
sives, we recommend placing the nozzle in a paraffin oil bath during longer work breaks.
Attention!
The HB 910 manual application units are only approved for operation with heatable ho-
ses of the type BÜHNEN HP... and NS....
Separation from and connection to heatable hoses may only be implemented by compe-
tent personnel with electrical skills.
1.3 Notes on safe operation
• Never point the operational application unit towards yourself or at other persons.
Danger!
Before every maintenance or repair work on the heatable hose
, remove the mains
plug from the tank system.
Otherwise, an adjacent radio control could accidentally activate the pump during the
maintenance or repair work.
Danger of burning caused by hot melt adhesive!