Buhnen HB 230E, Operating Instructions Manual

Page: 13 / 48

- 13 -
3.6 Changing the Nozzle
Special nozzles are available for special tasks.
To change the nozzle, the unit must be warm but disconnected from the power supply.
Wear heat-protection gloves to hold the unit.
Unscrew the nozzle (1), being careful not to pull the trigger.
Screw on the new nozzle hand-tight.
4 Repairs
Repairs may only be carried out by qualified electricians.
For your safety, take advantage of the time- and money-saving replacement service.
5 Accessories
Various nozzles are available for the hot melt glue gun.
Please ask your dealer or specialist adviser for further information.
6 Warranty
This unit has been developed and manufactured in accordance with the state-of-the-art. We provide
the initial purchaser with a warranty on function, materials, and workmanship in accordance with the
relevant provisions contained in law. Normal wear and tear are excluded.
The warranty shall become null and void if it is established that the unit has been used improperly,
force has been applied, repairs have been made by third parties or non-genuine replacement parts
have been employed.
The warranty shall be honored either by repair or replacement, at our discretion. Any warranty beyond
our standard delivery is excluded as we have no control over the proper use of the unit or adhesives.
Please observe our terms and conditions.
2SHUDWLQJ,QVWUXFWLRQV