Buhler GAS 222.20 DH, Assembly, Installation And Operation Instructions

Page: 4 / 35

GAS 222.20 DH
1 Introduction
1.1 Intended Use
The sample gas probe is intended for installation into gas analysis systems in commercial applications.
Sample gas probes are among the main components in a gas conditioning system.
– Therefore also note the related drawing in the data sheet in the appendix.
– Before installing the device, verify the listed technical data meet the application parameters.
– Further verify all contents are complete.
Please refer to the type plate to identify your model. In addition to the job number/ID number, this also contains the article
number and model designation.
Please note the specific values of the device when connecting, and the correct versions when ordering spare parts.
1.2 Type Plate
Example:
GAS 222.20DH
100107323 462220009902000112213 001
230V 50/60Hz 440W
material: 1.4571/1.4408/PTFE
Read manual!
Manufacturer and address
Model designation
Order no., Item no.
Material
Electrical supply
1.3 Scope of Delivery
– 1 x Sample gas probe
– 1 x Flange gasket and screws
– Product documentation
– Connection and mounting accessories (only optional)
1.4 Ordering instructions
The item number is a code for the configuration of your unit. Please use the following model key:
4622220 0 9 9 0 9 X 0 0 9 9 9 9 9 9 Product Characteristics
Flange/approval
DIN DN65 PN6
Power supply sample probe
Steam
Calibrating gas connection
0 No calibrating gas connection
1 6 mm
2 6 mm + check valve
3 1/4"
4 1/4" + check valve
1.5 Product Description
Probe Description
GAS 222.20DH Probe with downstream filter
Accessories Please refer to the data sheet at the end of this manual for accessories for this probe
2 Bühler Technologies GmbH BE460045 ◦ 10/2019