Malfunctions
Safety
94
SnackFix
2016-08
10 Malfunctions
Reasons for malfunctions and their removal are described in this
chapter.
If malfunctions occur increasingly, shorten the maintenance intervals
as required.
For any malfunctions that can not be removed with the help of the
notes below, please contact the manufacturer, see page 2 for the
service address.
10.1 Safety
Elekt_3_Anl
Electrical system
DANGER
Electrocution danger!
Electrocution danger exists when live components are touched.
Electrical components which are switched on can carry out
uncontrolled movements and lead to serious injury or death.
Before beginning work, switch off the electrical power supply and
secure against restarting.
Elekt_2_Rest
Stored charges
DANGER
Electrocution danger from stored charges!
In electronic components, electrical charges can be stored which
are present even after switching off and disconnecting from the
power supply. Any contact with these components can lead to seri-
ous injury or death.
Before working on the components mentioned, disconnect them
completely from the power supply. Allow 10 min to pass in order
to be sure that the internal capacitors are completely discharged
Elekt_5_Sichern_1