Buhler 2595, Operator And Parts Manual

Page: 15 / 48

bühler
Allied Front-End Loader
- 13 - P4094
Minimize turning angle and length of run
between pile and trailer to increase loading
efficiency. Also, place load evenly or
centered in the attachment.
WARNING
Carry the load no
higher than necessary to clear the terrain.
Turn and brake slowly. Always be sure that
loading area is level and on solid ground. Do
not raise loader higher then required while
dumping. Immediately lower the loader to
ground if the tractor becomes unstable.
Leave material, which drifts over the bucket
sides for final cleanup.
Backfilling or Scraping:
For forward back filling, approach pile with a
level bucket. Utilize the float position to
minimize bucket cutting edge wear. Leave
dirt in bucket. Dumping on each pass
reduces efficiency.
NOTE: Use leveling rod for a guide to
ensure bucket is level.
Do not use bucket in dumped position for
forward grading. This will only impose
severe shock loading on the bucket cylinders
and it is difficult to maintain a level grade.