BLUE-TOOTH CONNECTING OPERATION
To avoid not pairing correctly with other devices, please locate your Buhel SG05 and the device that you wish to pair
as close as possible, better within 1 meter.
Please also control that there are no other devices with pairing code “0000” (four zeros) active nearby. Press and hold
the MFB for 2 seconds (approx.) until the Blue and Red LED flashes alternatively quickly. SG05 is in pairing mode now.
Search for Buhel SG05 using your phone or other device. For more information on how to search for a Bluetooth®
device, please refer to the Instruction Manual of your Phone/Device.
Select “Buhel SG05” from the list of devices discovered from your phone or music reader. Follow the onscreen steps
to confirm the selection.
Please Note
: some models of phones or music readers also may require you to insert a password. In this case, please
enter the passkey “0000” (four zeros).
When pairing is successful, the blue LED flashes slowly.
You do not need to pair again, for a paired device; you will only have to follow the normal ON Procedure. (LED
flashes slowly)
Remove Blue-Tooth Connection: Power off your SG05.
Place your SG05 out of the Blue-Tooth sensing distance of the paired device. Select the Disconnection function on the
paired device and follow the procedure.
AUTOMATIC ANSWER
SOUNDglasses® SG05 has auto-answer for incoming call. The incoming call is answered automatically after
approximately 6 seconds. Press MFB for 2 seconds to reject an incoming call.
VOICE DIALLING
SOUNDglasses® SG05 allows Voice Dialing phone calls. This feature is supported only by mobile phones that include
the Voice Dial feature.
Under stand-by mode, press the MFB button until you hear the voice indication from your mobile. Pronounce clearly
the pre-recorded voice tag stored in the mobile. Follow the voice instructions of your mobile.
VOLUME SETTING
The volume can be adjusted on 4 separate levels and is increased by one level at a time when the volume button is
pushed.
RESTORING THE FACTORY SETTINGS
In the event the user has problems with the pairing with another device or making an operation, the function will be
blocked. In this case, it is necessary to reset the function and restore back to the factory settings by the following
operation: in the stand-by mode, press simultaneously MFB button and the Volume button for 6 seconds until
hearing 2 beeps.
Follow the pairing or the operation instruction once again from the start.