Short Information on “How to Start Using your SOUNDglasses straight away:
HOW TO USE
Before you use your new
BUHEL
SOUNDglasses® SG05 for the first time, the battery
must be fully charged.
Please
follow the Battery Charging Instructions shown below.
Micro USB Port
Multi-Function Button
Volume Button
Microphone
Travel charger
& adaptor
BATTERY CHARGING INSTRUCTIONS
Connect SG05 to the charger plug and the Travel Charger to an AC wall outlet and connect the micro USB end to the
SG05 charging port.
Normal full charge time is approx. 2 hours.
Red LED is on during charging. When the charging is complete, the Blue LED will be on.
After the charging is completed, please remove the charger from SG05 and the AC wall outlet.
Please Note: Whenever low battery power is encountered, it is recommended to charge the battery as soon as
possible for a better durability and standby life of the battery. Under low voltage status, SG05 will power off after 15
minutes of use if the battery is not charged.
Advice: Do not use the product during charging. Do not charge the battery if not necessary to avoid shortening
battery lifetime.
PAIRING PROCEEDURE
Your new SOUNDglasses® SG05 should only be connected only to mobile phones, music readers, GPS navigators and
other devices that are equipped with a Bluetooth® communication system. To achieve wireless connection with your
BT mobile phone, it is necessary to make an initial setting operation called “
Pairing
”.
The Pairing process is required only when the product is used for the first time.
From the second time on, when you push the power switch ON some phones will re-connect automatically (Blue- Tooth
auto re-connection feature); some others will show “Do you want to connect with Buhel SG05?” Push “ok” only.