10
PROGRAMMING
NOTE:
All programming is done using the
PENDANT CONTROL
.
For programming use the following “Alpha Keys”.
Push A: To select the type of cut and enter dimensions.
B: To enter the time delay (for plasma cutting).
C: To change Cut Number in memory (numbers 0 – 9).
D: To display the type and dimensions of the cut.
E: To enter end of cut slowdown.
PENDANT CHARACTER MAP:
Direct and Shifted Characters
.
Shift Key
U: set Units, inch or metric
R: set Ratio
T: Test drives & encoders, function
V: Version Number
SHIFTED CHARACTER SET E.g. to
type U for units,
press Shift Key, then “9”
Shift Key
PENDANT CONTROLS
