background image

WLI

2

-CF-S11 

User's Manual

6

All rights for this manual are owned by BUFFALO.  No part of this manual may be
transmitted, reproduced, or revised without permission from BUFFALO.

Product names of other companies used in this manual are trademarks or registered
trademarks of the respective companies.
Trademark symbols

 , ,  

are not indicated in this manual.

Specifications, design, and other descriptions included in this manual are subject to
change without notice.

This manual is carefully prepared, however, feel free to contact your nearest sales

representative if you have any questions or problems.

This product should be used as a general OA device in offices or at home.  BUFFALO does

not accept any liability if the product is used other than as a general OA device.

Do not use this product for any device or system which requires high safety such as a
medical device or any system which is directly or indirectly related to maintaining
human life.

If this product is used for any device or computing system which requires more
reliability than general OA devices, please make sure that you take any necessary actions
to ensure safety and prevent system malfunctioning.

Be sure to follow the operation method described in this manual.  In particular, never use
this product in such a way as violating the method described as a caution.

WLI-CF-S11G.book  6 ページ  2002年2月27日 水曜日 午後9時10分

Summary of Contents for WLI2-CF-S11







































































Reviews: