GEN7000 7000 Watt Generator Manual
10
GENERATOR COMPONENTS
Observe the locations and functions of the various components and controls of this generator.
(1) 120/240 Volt AC Outlet
- Used for connecting electrical devices
that run on 120 and/or 240 Volt, 60 Hz, single phase, AC current.
(2) Ground Terminal
- Used for connecting grounding wires to
properly ground this generator.
(3) 120 Volt AC Outlet
- Used for connecting electrical devices that
run on 120 Volt, 60 Hz, single phase, AC current.
(4) AC Reset
- Breaker that protects this generator from electrical AC
overload and short circuit.
(5) Plug Lock
- Used for preventing the plug fall down by across the
cable in.
(6) 12 Volt DC Outlet
- Only used for charging 12 Volt automotive-
type batteries.
(7) DC Reset
- Breaker that protects this generator from electrical DC
overload and short circuit.
(8) Key Ignition
(9) Key Reset
- Breaker that protects this generator from electrical DC
overload and short circuit.
(10) Oil Filler/Dipstick Ca
p - Location for checking and filling the
engine crankcase oil.
(11) Battery case
(12) Recoil Starter
- Pull-cord for starting the engine.
(13) Fuel Gauge
- Indicates the amount of gasoline remaining in the
fuel tank.
(14) Fuel Tank Cap
- Access to the fuel tank for adding gasoline.
(15) Spark Plug
- Provides ignition to the engine.
(16) Fuel Filter Cup
- Traps dirt and water from the fuel prior to
entering the engine.
(17) Air Filter
- A removable, cleanable, sponge-like element that limits
the amount of dirt pulled into the engine.
(18) Choke Leve
r - Adjusts the amount of air allowed into the engine.
(19) Muffler
- Reduces the engine noise level.
(20) Fuel Valve
- Allows gasoline to pass into the engine.
2
3
4
5
6
10
8
12
7
9
11
14
13
18
17
16
15
19
20