1
This AirStation supports quickly changing the
product from a full wireless router to a simple access
point.
Put your Airstation into Access Point Mode by
moving the “ROUTER” switch on the bottom of your
AirStation from ON to OFF. This changes the default
IP address of the AirStation from 192.168.11.1 to
192.168.11.100, and DHCP, NAT, and the WAN port
are disabled. All router functionality is disabled, and
the WZR2-G300N becomes a simple access point.
Access Point Mode might be desirable if you’re
adding wireless capability to an existing network that already has a router. It is not
suitable for most home configurations where the unit is the only router in the network. If
you plan to use the AirStation as a normal wireless router, make sure that this switch is in
the normal (ON) position!
Router/Access Point Mode
