Buffalo MCDSG Assembly Instructions Download Page 3

Page: 3 / 4

MCDSG Double Seat Glider Chair Assembly Instructions

ASSEMBLY

1) Connect main frame &
crossmember #1 & #2. insert
the End Cap (H). Use Long
Screw + Small Washer +
Frame + Small Screw + Nut

2) Connect chair frame and
crossmember #5 & #6 by
firmly pressing the kinked end
into the open end.

Connect chair back and seat
with Small screw + Big
#7 & #8 + Big
Nut

Connect seat hardware with
Small Screw + Big
Seat + Big Nut

Place the seats inside
the frame.

Assemble by using the
hardware Small Screw +
Big Frame +
Big Nut

Long Screw + Small Washer
+ Frame + Seat +
Side S Small
Nut

Add hardware Long Screw
+ Small Frame +
Side S Small
Nut

Assemble Long
Screw + Small
Frame +
Small
Nut

Assemble Seta & Chair
frame with Long Screw
+ Small
Frame + Small
Nut

Place side support between two
frames. Use hardware Long Screw
+ Small Frame + Big
S Big Washer
Nut + Acorn Nut

Put chair frame and seat
inside the main frame.

REVIEW ALL WARNINGS ON BACK PAGE

Summary of Contents for MCDSG

Page 1: ...that may occur We reserve the right to change this product at any time without prior notice IF THERE IS ANY QUESTION ABOUT A CONDITION BEING SAFE OR UNSAFE DO NOT OPERATE THIS PRODUCT DO NOT RETURN T...

Page 2: ...duct Do not use harsh chemicals such as alcohol ammonia gasoline carbon tetrachloride paint thinner etc to clean this product Use soap and water Make sure all parts are available before assembly Two a...

Page 3: ...ut Place the seats inside the frame Assemble by using the hardware Small Screw Big Washer Frame Big Washer Nut Long Screw Small Washer Frame Spacer Seat Side Support Small Washer Nut Add hardware Long...

Page 4: ...BE BUILT INTO ANY PRODUCT THESE FACTORS MUST BE SUPPLIED BY THE OPERATOR Keep the work area clean and well lit during assembly A cluttered work area may cause accidents Never allow children to use th...