Buffalo LinkTheater PC-4LWAG, Manual

Page: 22 / 67

22
Unless the chosen network is open, you will need to enter the encryption key (password) for the
wireless network.
Press the right arrow to have DHCP automaticly configure your network settings (recommended). If
you select ‘Enter the Settings (Static Address)’ then you will have to set your IP address and subnet
mask manually.
Input the WEP (hex) or WPA Personal (alphanumeric) key into the key field. Highlight the key field,
press the remote’s ENTER key, type the key in, and press ENTER again when finished. Use the 0-9
keys in sequence to type numbers and letters into the field (similar to how a cell phone works). For
capital letters, please cycle through the lower case and numbers first. The left arrow key is used for
backspace, the right arrow key for space.
Select Continue when done.