Buffalo LinkStation Pro, Quick Setup Manual

Page: 5 / 116

4
Press the power button on the front panel to turn
your LinkStation on.
Check the LINK/ACT LED on the front of the
LinkStation. If it’s lit, then your LinkStation is
connected properly.
• both LinkStation and the hub, switch, or PC are powered on,
• the Ethernet cable is securely fastened to both devices, and
• the Ethernet cable is not damaged. To verify, try using another Ethernet cable.
Step 2: Check your Connection
If the LINK/ACT LED on the front of LinkStation is not lit, your LinkStation is
not properly connected to your network. Make sure that:
If problems persist, contact our technical support.