Buffalo GF439, Instruction Manual

Page: 5 / 40

-5-
Telephone Helpline: 0845 146 2887 (United Kingdom)
Troubleshooting
Fault Probable Cause Action
The unit is not working The Unit is not switched on Check the unit is plugged in correctly and
switched on
Plug and lead are damaged Call BUFFALO agent or qualified technician
Fuse in the plug has blown Replace the plug fuse
Power supply Check Power Supply
Internal wiring fault Call BUFFALO agent or qualified technician
Appliance does not remove all the air from
the bag
Bag not correctly positioned Open lid and reposition bag
Open end of bag is dirty Clean bag
Bag may be punctured Replace bag
Incorrect bags used Call Vacuum Pack machine supplier
Bags are not sealing correctly Moisture in bag under the sealing bar Ensure inside of the bag is dry and free from
moisture where it is to be sealed
Incorrect bags used Call Vacuum Pack machine supplier
End of bag not placed above sealing bar Move end of bag over sealing bar
Heat sealing foam bar missing or incorrectly
aligned.
Replace or re-position (Spare part
code:AE931)
Sealing Bar requires replacement Call BUFFALO agent or qualified technician
Error message E in Digital Display Machine has overheated. Switch off Power and leave for 20 minutes.
NOTE: Sealing bar replacement is not covered under warranty
Technical Specification
Model Voltage Power Current
Vacuum Pressure
(approx.)
Dimensions
h x w x d mm
Weight
(kg)
GF439 230v 50hz 630W 3A -992mbar 429 x 359 x 378 24.4